
Home › Knowledge Hub › Environmental Cleaning › Environmental Cleaning in Aged Care: A Complete IPC Guide
Pillar Page
By Lyndon Forrest, Managing Director · Clinically reviewed by Bridgette Mackie & Dianne Newey, Clinical Directors · May 2026 · Updated November 2026 · 13 min read
Environmental Cleaning in Aged Care: A Complete IPC Guide
TL;DR —
Environmental cleaning in aged care is the systematic process of removing organic matter, dirt, and microorganisms from surfaces and equipment to prevent healthcare-associated infections (HAIs). Under the Strengthened Aged Care Quality Standards (effective 1 November 2025), Standard 4, Outcome 4.2, Action 4.2.1 a system for infection prevention and control is implemented which includes standard and transmission-based precautions which includes environmental cleaning – appropriate to the setting. The ACSQHC Aged Care IPC Guide (2024), Chapter 6 provides the definitive framework: routine cleaning and disinfection of surfaces and the environment using neutral detergent and water and ARTG listed disinfectants, spills management, Reusable medical devices must be reprocessed according to the Spaulding classification and AS 5369:2023. Cleaning should be audited regularly, and objective methods such as fluorescent gel markers and ATP bioluminescence testing can be used alongside visual inspection.

Why Does Environmental Cleaning Matter for IPC in Aged Care?
Environmental cleaning in aged care is the first line of defence against healthcare-associated infections. Contaminated environmental surfaces serve as reservoirs for pathogens including Clostridioides difficile, methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and norovirus — all of which can survive on surfaces for hours to months.
The ACSQHC Aged Care IPC Guide (2024), Chapter 6 states that effective environmental cleaning reduces the bioburden on surfaces and interrupts the chain of infection, and thus the transmission of infectious agents. Aged care residents are particularly vulnerable due to advanced age, comorbidities, immunosuppression, shared living spaces, and frequent contact with healthcare workers who move between residents.
Environmental cleaning in aged care encompasses all surfaces, fittings, fixtures, and non-critical reusable equipment within the care environment. This includes resident rooms, bathrooms, communal areas, clinical treatment rooms, kitchens, laundries, and outdoor living spaces. The scope extends beyond visible cleanliness to microbiological cleanliness — a surface may appear clean but still harbour pathogenic organisms.
For a detailed breakdown of the difference between cleaning and disinfection, including product selection and the two-step process, see Cleaning and Disinfection in Aged Care: What’s the Difference and Why It Matters
What Are the Regulatory Requirements for Environmental Cleaning in Aged Care?
Multiple regulatory frameworks impose environmental cleaning obligations on aged care providers. These frameworks operate concurrently, and compliance requires an integrated approach to cleaning governance, practice, and documentation.
| Regulatory Framework | Key Requirement | Environmental Cleaning Relevance |
|---|---|---|
| Strengthened Aged Care Quality Standards (1 Nov 2025) | Standard 4, Outcome 4.2 (Action 4.2.1) and Standard 5, Outcome 5.2 | An IPC system, including standard and transmission-based precautions and environmental cleaning appropriate to the setting |
| ACSQHC Aged Care IPC Guide (2024) | Chapter 6: Environmental Cleaning | Definitive guidance on products, processes, schedules, and auditing |
| Work Health and Safety Act 2011 | Sections 17–19 | Duty to eliminate or minimise risks — includes cleaning chemical hazards and infection risks |
| AS 5369:2023 | Reprocessing of reusable medical devices | Standards for cleaning, disinfection, and sterilisation of reusable equipment |
| Australian Register of Therapeutic Goods (ARTG) | Product registration | Hospital-grade disinfectants must be registered on the ARTG |
The Strengthened Aged Care Quality Standards, effective 1 November 2025, are the primary regulatory framework. Outcome 4.2 (Infection prevention and control), Action 4.2.1, requires providers to implement an IPC system, and Outcome 5.2 applies it to clinical care; environmental cleaning programs, schedules, product selection, training, and auditing all fall within this requirement. Action 4.2.1 (d) describes standard and transmission-based precautions, including environmental cleaning practices appropriate to the setting.
For broader IPC governance and risk management requirements, see IPC Risk Management in Aged Care
What Is the Difference Between Routine and Enhanced Cleaning?
Environmental cleaning in aged care operates at two levels: routine cleaning (standard conditions) and enhanced cleaning (elevated infection risk). The ACSQHC Aged Care IPC Guide (2024) distinguishes these levels based on the infection risk present in the environment.
Need help implementing this in your facility? The IPS Hub gives your IPC Lead instant access to ready-made policies, procedures, and audit tools — updated monthly.
Routine Cleaning
Routine cleaning is the baseline level of environmental cleaning performed daily (or at defined frequencies) under standard conditions — when no specific infection or outbreak is identified. Routine cleaning uses a neutral detergent and water, applied with a clean cloth using appropriate technique (e.g., wiping in one direction in an S- motion, and not re-dipping soiled cloths into cleaning solution).
Removes visible soil, organic matter, and the majority of microorganisms
Uses neutral detergent (pH 6–8) and warm water
Applied to all surfaces and non-critical equipment
Frequency determined by cleaning schedules, see Environmental Cleaning Schedules for Aged Care Facilities
Does not require a disinfection step under standard conditions
Enhanced Cleaning
Enhanced cleaning is implemented when the infection risk is elevated — during outbreaks, when a resident has a known infection with an epidemiologically significant organism, or when transmission-based precautions are in place. Enhanced cleaning adds a disinfection step to the routine cleaning process.
Uses the two-step process: clean with neutral detergent first, then apply hospital-grade disinfectant
Increased frequency of cleaning (e.g., high-touch surfaces cleaned twice daily instead of once)
Broader scope — additional surfaces and items included
Hospital-grade disinfectant must be registered on the ARTG
Two-in-one products (combined detergent-disinfectant) may be used if they are ARTG-registered and manufacturer instructions are followed
For detailed guidance on the two-step process, disinfectant selection, and product types, see Cleaning and Disinfection in Aged Care
What Cleaning Products Should Be Used in Aged Care?
Product selection for environmental cleaning in aged care depends on the purpose (cleaning vs disinfection), the surface type, and the infection risk level. The ACSQHC Aged Care IPC Guide (2024) specifies three main product categories.
| Product | Purpose | When to Use | Key Requirements |
|---|---|---|---|
| Neutral detergent | Cleaning — removes soil and organic matter | Routine cleaning under standard conditions | pH 6–8; compatible with surfaces; no antimicrobial claim required |
| Hospital-grade disinfectant | Disinfection — kills or inactivates microorganisms | Enhanced cleaning during outbreaks, infections, or when transmission-based precautions are in place | Must be registered on the ARTG; follow manufacturer instructions for concentration and contact time |
| Sodium hypochlorite (bleach) | Disinfection — broad-spectrum antimicrobial activity | Specific situations: C. difficile, norovirus, blood/body fluid spills | Effective concentration varies by application (1,000 ppm for general disinfection; an appropriate bleach or disinfectant concentration for blood/body fluid spills); must follow manufacturer instructions; corrosive — unsuitable for some surfaces |
All hospital-grade disinfectants used in Australian aged care must be registered on the Australian Register of Therapeutic Goods (ARTG). Using unregistered products for disinfection is a compliance risk. The ARTG registration confirms the product has been evaluated for safety and efficacy by the Therapeutic Goods Administration (TGA).
Manufacturer instructions for use (IFU) must be followed for all cleaning and disinfection products. Critical parameters include dilution ratio, contact time (dwell time), temperature, shelf life of prepared solutions, and material compatibility. Deviating from IFU — for example, diluting a disinfectant beyond the recommended concentration — may render the product ineffective.
What Is the Two-Step Cleaning and Disinfection Process?
The two-step process is the recommended method for cleaning and disinfection in aged care when disinfection is required. Step 1 involves cleaning the surface with a neutral detergent to remove soil and organic matter. Step 2 involves applying a hospital-grade disinfectant to the cleaned surface. This two-step approach is necessary because organic matter (blood, body fluids, biofilm) can inactivate many disinfectants, reducing their efficacy.
Two-in-one products (combined detergent-disinfectants) are an alternative to the two-step process. These products clean and disinfect in a single application. However, two-in-one products must be ARTG-registered and used strictly according to manufacturer IFU. Not all two-in-one products are effective against all organisms — check the product label for the spectrum of antimicrobial activity.
For a comprehensive comparison of two-step vs two-in-one approaches, product types, and common mistakes, see Cleaning and Disinfection in Aged Care
How Should Cleaning Schedules Be Developed?
Cleaning schedules define what surfaces and equipment are cleaned, how frequently, by whom, using what products and methods, and how completion is documented. The ACSQHC Aged Care IPC Guide (2024), Table 20 provides recommended cleaning frequencies for common areas and items in aged care.
Cleaning frequency is determined by the level of infection risk associated with each area or item. High-touch surfaces (door handles, light switches, bedrails, call bells, toilet flush buttons) require more frequent cleaning than low-touch surfaces (walls, ceilings, window sills). During outbreaks, cleaning frequencies increase for all surfaces in affected areas.
| Area / Item | Standard Frequency | Outbreak / Enhanced Frequency |
|---|---|---|
| High-touch surfaces (door handles, bedrails, light switches) | At least daily | At least twice daily |
| Bathrooms and toilets | At least daily | At least twice daily; after each use if feasible |
| Floors (resident rooms) | Daily | Daily or more frequently as required |
| Communal areas (dining, lounge) | Daily plus after each meal service | After each use or activity |
| Clinical treatment rooms | Daily plus between each resident use | Between each resident use plus terminal clean at end of day |
| Kitchen and food preparation areas | Before and after each meal service | Before and after each meal service (no change) |
| Laundry | Daily | Daily (enhanced segregation of linen in outbreaks) |
| Shared resident equipment (commodes, shower chairs, hoists) | After each resident use; when visibly soiled | After each use, plus daily during outbreaks |
For detailed guidance on developing, implementing, and documenting cleaning schedules — including home care considerations — see Environmental Cleaning Schedules for Aged Care Facilities
What Is the Spaulding Classification and How Does It Apply?
The Spaulding classification system categorises medical devices and equipment into three levels based on the infection risk associated with their use. This classification determines the minimum level of reprocessing (cleaning, disinfection, or sterilisation) required. The system was developed by Dr Earle Spaulding in 1968 and remains the international standard for reprocessing decisions.
| Category | Definition | Aged Care Examples | Minimum Reprocessing |
|---|---|---|---|
| Critical | Enters sterile tissue or the vascular system | Surgical instruments, implants (rarely used in aged care; typically sent to external sterilisation services) | Sterilisation |
| Semi-critical | Contacts mucous membranes or non-intact skin | Respiratory therapy equipment, vaginal specula | High-level disinfection (minimum) |
| Non-critical | Contacts intact skin only | Blood pressure cuffs, stethoscopes, wheelchairs, bedrails, commode chairs, shower chairs | Clean with detergent between each resident; disinfect where indicated by risk (visible contamination, body fluids, transmission-based precautions) |
In aged care, most reusable equipment falls into the non-critical category. However, providers must still ensure this equipment is cleaned between each resident use. The standard AS 5369:2023 (Reprocessing of reusable medical devices) provides the technical framework for reprocessing in healthcare settings, including aged care.
What Is Terminal Cleaning?
Terminal cleaning is a thorough, systematic cleaning and disinfection of an entire room or area, including all surfaces, equipment, furnishings, and fittings. Terminal cleaning is performed after a resident vacates a room (due to transfer, discharge, or death), after the resolution of an outbreak in a specific area, or when a room is prepared for a new resident.
Terminal cleaning goes beyond routine cleaning in scope and intensity. Every surface in the room — including those not reached during routine cleaning (mattress undersides, bed frames, behind furniture, inside drawers, curtain tracks) — is cleaned and disinfected. The process uses the two-step method: neutral detergent cleaning followed by hospital-grade disinfectant application.
For a step-by-step terminal cleaning process, PPE requirements, checklists, and common errors, see Terminal Cleaning in Aged Care: When and How to Do It Right
How Should Blood and Body Fluid Spills Be Managed?
Blood and body fluid spills require immediate management using a specific protocol. The ACSQHC Aged Care IPC Guide (2024) recommends a spill management procedure based on the size and type of spill. All staff who may encounter spills must be trained in the procedure.
Small Spills (Less Than 10 cm Diameter)
Don PPE: gloves (and apron if splash risk)
Wipe up the spill immediately using absorbent material (paper towel or cloth)
Clean the area with neutral detergent and water
Apply hospital-grade disinfectant or sodium hypochlorite (1,000 ppm) to the area
Allow the required contact time per manufacturer IFU
Wipe dry
Dispose of waste per your waste policy (clinical waste if blood-soaked or dripping)
Remove PPE and perform hand hygiene
Large Spills (Greater Than 10 cm Diameter)
Don PPE: gloves, apron, and eye/face protection if splash risk
Contain the spill using absorbent granules or absorbent material
Carefully collect absorbed material and dispose in clinical waste
Clean the area with neutral detergent and water
Apply sodium hypochlorite at an appropriate bleach or disinfectant concentration (as per facility protocol) to the area
Allow the required contact time
Wipe dry
Dispose of waste per your waste policy (clinical waste if blood-soaked or dripping)
Remove PPE and perform hand hygiene
Sodium hypochlorite at an appropriate bleach or disinfectant concentration is recommended for large blood/body fluid spills because of its broad-spectrum activity including against bloodborne viruses (hepatitis B, hepatitis C, HIV). This concentration is corrosive to some surfaces — check compatibility before use. Alternative ARTG-registered sporicidal products may be used if they are validated for blood/body fluid spill management.
Sodium hypochlorite is corrosive and can damage some surfaces, so check compatibility before use. Make up solutions in a well-ventilated area, wearing gloves and eye protection, and use fresh solution each day. Never mix hypochlorite with ammonia-based products (including urine), acids or other cleaning products: this can release chloramines or chlorine gas. Clean the spill with detergent first, then disinfect. Your spill procedure should state the strength used and be approved by your IPC Lead.
How Should Environmental Cleaning Be Audited?
Auditing environmental cleaning is essential to verify that cleaning is being performed correctly and consistently. Visual inspection alone is insufficient — surfaces may appear clean but still harbour pathogenic organisms. The ACSQHC Aged Care IPC Guide (2024) recommends a combination of audit methods.
| Audit Method | What It Measures | Advantages | Limitations |
|---|---|---|---|
| Visual inspection | Visible cleanliness (soil, dust, stains) | Simple, no cost, immediate feedback | Cannot detect microbial contamination; subjective; unreliable as sole method |
| Fluorescent gel markers | Whether surfaces were physically touched during cleaning | Objective; identifies missed surfaces; supports staff training | Does not confirm microbiological cleanliness; requires UV light for reading |
| ATP bioluminescence testing | Adenosine triphosphate (ATP) on surfaces — a proxy for organic material and microbial contamination | Rapid result (seconds); quantitative; identifies cleaning failures | Higher cost per test; results can be affected by cleaning product residues; requires benchmarking |
For comprehensive guidance on audit methods, frequency, tools, documentation, and using audit results for continuous improvement, see How to Audit Environmental Cleaning in Aged Care
What Workforce Training Is Required for Environmental Cleaning?
All staff responsible for environmental cleaning in aged care must receive competency-based training at induction and at defined intervals thereafter. The Strengthened Aged Care Quality Standards, Outcome 2.9: Outcome statement; The provider must provide aged care workers with training and supervision to enable them to perform their roles effectively. Training must be documented, and records are retained.
Principles of infection prevention and the chain of infection
Standard precautions including hand hygiene (5 Moments for Hand Hygiene)
Correct use and disposal of PPE
Product knowledge: neutral detergent, hospital-grade disinfectant, sodium hypochlorite — dilution, contact time, safety
The two-step cleaning and disinfection process
Cleaning technique: high-to-low, clean-to-dirty, one-direction wiping
Spill management procedures
Cleaning schedules: reading, demonstrating understanding and completing documentation
Outbreak cleaning requirements and enhanced cleaning protocols
Safe handling and storage of cleaning chemicals (SDS awareness)
Reprocessing of reusable equipment (Spaulding classification basics)
Training should include practical demonstration and observed competency assessment — not just theoretical education. Staff must demonstrate they can perform cleaning tasks correctly before being assigned unsupervised cleaning duties.
How Does Environmental Cleaning Differ in Home and Community Aged Care?
Environmental cleaning in home and community aged care settings differs from residential facilities because the provider does not control the physical environment. The resident’s home is their private space, and cleaning interventions must be negotiated, respectful, and proportionate to the identified infection risk.
Care workers should clean reusable equipment they bring into the home before and after each visit
Single-use items should be used where practicable to avoid reprocessing in an uncontrolled environment
Alcohol-based hand rub should be carried by all care workers for hand hygiene between tasks
If enhanced cleaning is required (e.g., resident has a known MDRO), the care plan must specify products, method, and frequency
Care workers should not be expected to perform general household cleaning as a substitute for IPC-focused environmental cleaning
The Support at Home program (started 1 November 2025, alongside the new Aged Care Act) replaces the Home Care Packages Program and increases the importance of robust IPC protocols for environmental cleaning outside institutional environments.
What Are the Links Between Environmental Cleaning and Outbreak Management?
Environmental cleaning is a critical intervention during outbreaks. When an outbreak is declared, enhanced cleaning protocols must be activated immediately. The frequency, scope, and products used for cleaning change during outbreaks to reduce environmental contamination and interrupt transmission of infectious agents.
Cleaning frequency increases — high-touch surfaces cleaned at least twice daily
Two-step cleaning and disinfection is required for all surfaces in affected areas
Disinfectant selection should target the causative organism (e.g., sodium hypochlorite for C. difficile and norovirus)
Terminal cleaning is performed for rooms of affected residents upon discharge or transfer
Additional cleaning resources (staff, products, equipment) may need to be sourced
Cleaning logs should be reviewed and audited during the outbreak to verify compliance
For comprehensive outbreak management guidance, see Outbreak Management in Aged Care
Frequently Asked Questions
What is the difference between cleaning and disinfection?
Cleaning removes soil, organic matter, and most microorganisms from a surface using a detergent and water. Disinfection kills or inactivates remaining microorganisms on a surface using a chemical agent (hospital-grade disinfectant). Cleaning must always precede disinfection because organic matter can inactivate disinfectants.
Do aged care facilities need to use hospital-grade disinfectants for routine cleaning?
No. Under standard conditions (no known infection or outbreak), routine cleaning with a neutral detergent and water is sufficient for most surfaces. Hospital-grade disinfectant is required when transmission-based precautions are in place, during outbreaks, or for specific situations such as blood/body fluid spills.
What does ARTG-registered mean for cleaning products?
ARTG stands for Australian Register of Therapeutic Goods. Hospital-grade disinfectants used in Australian aged care must be listed on the ARTG for the claims you need, which confirms the product has been evaluated by the Therapeutic Goods Administration (TGA). Sodium hypochlorite made up from bleach is used in specific situations where the Guide or your policy indicates it, with strength and contact time set by facility policy.
How often should high-touch surfaces be cleaned?
Under standard conditions, high-touch surfaces (door handles, light switches, bedrails, call bells, toilet flush buttons) should be cleaned at least once daily. During outbreaks, the frequency increases to at least twice daily. Some facilities may adopt more frequent cleaning based on local risk assessment.
What is terminal cleaning and when is it required?
Terminal cleaning is a thorough cleaning and disinfection of an entire room, including all surfaces, equipment, and furnishings. Terminal cleaning is required when a resident vacates a room (transfer, discharge, or death), after outbreak resolution in a specific area, or when preparing a room for a new resident. See Terminal Cleaning in Aged Care (/knowledge-hub/terminal-cleaning-aged-care/) for the full process.
References and Further Reading
The following authoritative sources inform the clinical and regulatory guidance in this article. Links open in a new tab.
- Australian Commission on Safety and Quality in Health Care. Infection Prevention and Control Guide for Residential Aged Care Facilities, Version 1.1. Sydney: ACSQHC; January 2025.
- Aged Care Quality and Safety Commission. Strengthened Aged Care Quality Standards 2025 — Standard 5: Environmental management and cleaning. Canberra: ACQSC; 2025.
- Therapeutic Goods Administration. Disinfectants and sanitisers — regulatory requirements. Canberra: TGA; 2024.
- Centers for Disease Control and Prevention. Guidelines for Environmental Infection Control in Health-Care Facilities. Atlanta: CDC; 2003 (updated 2019).
- Department of Health and Aged Care. Environmental cleaning and infection prevention and control. Canberra: Commonwealth of Australia; 2024.
In This Article
- Why Does Environmental Cleaning Matter for IPC in Aged Care?
- What Are the Regulatory Requirements for Environmental Cleaning in Aged Care?
- What Is the Difference Between Routine and Enhanced Cleaning?
- What Cleaning Products Should Be Used in Aged Care?
- What Is the Two-Step Cleaning and Disinfection Process?
- How Should Cleaning Schedules Be Developed?
- What Is the Spaulding Classification and How Does It Apply?
- What Is Terminal Cleaning?
- How Should Blood and Body Fluid Spills Be Managed?
- How Should Environmental Cleaning Be Audited?
- What Workforce Training Is Required for Environmental Cleaning?
- How Does Environmental Cleaning Differ in Home and Community Aged Care?
- What Are the Links Between Environmental Cleaning and Outbreak Management?
- Frequently Asked Questions

About the Author
Lyndon Forrest is the Managing Director of Bug Control — Infection Prevention Services, with over 30 years’ experience supporting aged care facilities across Australia and New Zealand with infection prevention, antimicrobial stewardship, and accreditation readiness.
Clinically reviewed by Bridgette Mackie & Dianne Newey, Clinical Directors
Ready to Strengthen Your Facility’s Infection Prevention?
The IPS Hub provides aged care facilities across Australia and New Zealand with continuously updated IPC policies, AMS tools, outbreak management resources, and direct support from experienced IPC professionals.


